Modern object recognition models have millions of parameters and can take weeks to fully train. Transfer learning is a technique that shortcuts a lot of this work by taking a fully-trained model for a set of categories like ImageNet, and retrains from the existing weights for new classes. In this example we'll be retraining the final layer from scratch, while leaving all the others untouched. For more information on the approach you can see this paper on Decaf.
Though it's not as good as a full training run, this is surprisingly effective for many applications, and can be run in as little as thirty minutes on a laptop, without requiring a GPU. This tutorial will show you how to run the example script on your own images, and will explain some of the options you have to help control the training process.
Training on Flowers
Before you start any training, you'll need a set of images to teach the network about the new classes you want to recognize. There's a later section that explains how to prepare your own images, but to make it easy we've created an archive of creative-commons licensed flower photos to use initially. To get the set of flower photos, run these commands:
cd ~ curl -O http://download.tensorflow.org/example_../images/flower_photos.tgz tar xzf flower_photos.tgz
Once you have the images, you can build the retrainer like this, from the root of your TensorFlow source directory:
bazel build tensorflow/examples/image_retraining:retrain
If you have a machine which supports
the AVX instruction set
(common in x86 CPUs produced in the last few years) you can improve the running
speed of the retraining by building for that architecture, like this (after choosing appropriate options in
bazel build --config opt tensorflow/examples/image_retraining:retrain
The retrainer can then be run like this:
bazel-bin/tensorflow/examples/image_retraining/retrain --image_dir ~/flower_photos
This script loads the pre-trained Inception v3 model, removes the old top layer, and trains a new one on the flower photos you've downloaded. None of the flower species were in the original ImageNet classes the full network was trained on. The magic of transfer learning is that lower layers that have been trained to distinguish between some objects can be reused for many recognition tasks without any alteration.
The script can take thirty minutes or more to complete, depending on the speed of your machine. The first phase analyzes all the images on disk and calculates the bottleneck values for each of them. 'Bottleneck' is an informal term we often use for the layer just before the final output layer that actually does the classification. This penultimate layer has been trained to output a set of values that's good enough for the classifier to use to distinguish between all the classes it's been asked to recognize. That means it has to be a meaningful and compact summary of the images, since it has to contain enough information for the classifier to make a good choice in a very small set of values. The reason our final layer retraining can work on new classes is that it turns out the kind of information needed to distinguish between all the 1,000 classes in ImageNet is often also useful to distinguish between new kinds of objects.
Because every image is reused multiple times during training and calculating
each bottleneck takes a significant amount of time, it speeds things up to
cache these bottleneck values on disk so they don't have to be repeatedly
recalculated. By default they're stored in the
/tmp/bottleneck directory, and
if you rerun the script they'll be reused so you don't have to wait for this
Once the bottlenecks are complete, the actual training of the top layer of the network begins. You'll see a series of step outputs, each one showing training accuracy, validation accuracy, and the cross entropy. The training accuracy shows what percent of the images used in the current training batch were labeled with the correct class. The validation accuracy is the precision on a randomly-selected group of images from a different set. The key difference is that the training accuracy is based on images that the network has been able to learn from so the network can overfit to the noise in the training data. A true measure of the performance of the network is to measure its performance on a data set not contained in the training data -- this is measured by the validation accuracy. If the train accuracy is high but the validation accuracy remains low, that means the network is overfitting and memorizing particular features in the training images that aren't helpful more generally. Cross entropy is a loss function which gives a glimpse into how well the learning process is progressing. The training's objective is to make the loss as small as possible, so you can tell if the learning is working by keeping an eye on whether the loss keeps trending downwards, ignoring the short-term noise.
By default this script will run 4,000 training steps. Each step chooses ten images at random from the training set, finds their bottlenecks from the cache, and feeds them into the final layer to get predictions. Those predictions are then compared against the actual labels to update the final layer's weights through the back-propagation process. As the process continues you should see the reported accuracy improve, and after all the steps are done, a final test accuracy evaluation is run on a set of images kept separate from the training and validation pictures. This test evaluation is the best estimate of how the trained model will perform on the classification task. You should see an accuracy value of between 90% and 95%, though the exact value will vary from run to run since there's randomness in the training process. This number is based on the percent of the images in the test set that are given the correct label after the model is fully trained.
Visualizing the Retraining with TensorBoard
The script includes TensorBoard summaries that make it easier to understand, debug, and optimize the retraining. For example, you can visualize the graph and statistics, such as how the weights or accuracy varied during training.
To launch TensorBoard, run this command during or after retraining:
tensorboard --logdir /tmp/retrain_logs
Once TensorBoard is running, navigate your web browser to
localhost:6006 to view the TensorBoard.
The script will log TensorBoard summaries to
/tmp/retrain_logs by default. You can change the directory with the
The TensorBoard README has a lot more information on TensorBoard usage, including tips & tricks, and debugging information.
Using the Retrained Model
The script will write out a version of the Inception v3 network with a final
layer retrained to your categories to /tmp/output_graph.pb, and a text file
containing the labels to /tmp/output_labels.txt. These are both in a format that
the C++ and Python image classification examples
can read in, so you can start using your new model immediately. Since you've
replaced the top layer, you will need to specify the new name in the script, for
example with the flag
--output_layer=final_result if you're using label_image.
Here's an example of how to build and run the label_image example with your retrained graphs:
bazel build tensorflow/examples/label_image:label_image && \ bazel-bin/tensorflow/examples/label_image/label_image \ --graph=/tmp/output_graph.pb --labels=/tmp/output_labels.txt \ --output_layer=final_result \ --image=$HOME/flower_photos/daisy/21652746_cc379e0eea_m.jpg
You should see a list of flower labels, in most cases with daisy on top
(though each retrained model may be slightly different). You can replace the
--image parameter with your own images to try those out, and use the C++ code
as a template to integrate with your own applications.
If you'd like to use the retrained model in a Python program this example from @eldor4do shows what you'll need to do.
Training on Your Own Categories
If you've managed to get the script working on the flower example images, you
can start looking at teaching it to recognize categories you care about instead.
In theory all you'll need to do is point it at a set of sub-folders, each named
after one of your categories and containing only images from that category. If
you do that and pass the root folder of the subdirectories as the argument to
--image_dir, the script should train just like it did for the flowers.
Here's what the folder structure of the flowers archive looks like, to give you and example of the kind of layout the script is looking for:
In practice it may take some work to get the accuracy you want. I'll try to guide you through some of the common problems you might encounter below.
Creating a Set of Training Images
The first place to start is by looking at the images you've gathered, since the most common issues we see with training come from the data that's being fed in.
For training to work well, you should gather at least a hundred photos of each kind of object you want to recognize. The more you can gather, the better the accuracy of your trained model is likely to be. You also need to make sure that the photos are a good representation of what your application will actually encounter. For example, if you take all your photos indoors against a blank wall and your users are trying to recognize objects outdoors, you probably won't see good results when you deploy.
Another pitfall to avoid is that the learning process will pick up on anything that the labeled images have in common with each other, and if you're not careful that might be something that's not useful. For example if you photograph one kind of object in a blue room, and another in a green one, then the model will end up basing its prediction on the background color, not the features of the object you actually care about. To avoid this, try to take pictures in as wide a variety of situations as you can, at different times, and with different devices. If you want to know more about this problem, you can read about the classic (and possibly apocryphal) tank recognition problem.
You may also want to think about the categories you use. It might be worth splitting big categories that cover a lot of different physical forms into smaller ones that are more visually distinct. For example instead of 'vehicle' you might use 'car', 'motorbike', and 'truck'. It's also worth thinking about whether you have a 'closed world' or an 'open world' problem. In a closed world, the only things you'll ever be asked to categorize are the classes of object you know about. This might apply to a plant recognition app where you know the user is likely to be taking a picture of a flower, so all you have to do is decide which species. By contrast a roaming robot might see all sorts of different things through its camera as it wanders around the world. In that case you'd want the classifier to report if it wasn't sure what it was seeing. This can be hard to do well, but often if you collect a large number of typical 'background' photos with no relevant objects in them, you can add them to an extra 'unknown' class in your image folders.
It's also worth checking to make sure that all of your images are labeled correctly. Often user-generated tags are unreliable for our purposes, for example using #daisy for pictures of a person named Daisy. If you go through your images and weed out any mistakes it can do wonders for your overall accuracy.
If you're happy with your images, you can take a look at improving your results
by altering the details of the learning process. The simplest one to try is
--how_many_training_steps. This defaults to 4,000, but if you increase it to
8,000 it will train for twice as long. The rate of improvement in the accuracy
slows the longer you train for, and at some point will stop altogether, but you
can experiment to see when you hit that limit for your model.
A common way of improving the results of image training is by deforming, cropping, or brightening the training inputs in random ways. This has the advantage of expanding the effective size of the training data thanks to all the possible variations of the same images, and tends to help the network learn to cope with all the distortions that will occur in real-life uses of the classifier. The biggest disadvantage of enabling these distortions in our script is that the bottleneck caching is no longer useful, since input images are never reused exactly. This means the training process takes a lot longer, so I recommend trying this as a way of fine-tuning your model once you've got one that you're reasonably happy with.
You enable these distortions by passing
--random_brightness to the script. These are all percentage values that
control how much of each of the distortions is applied to each image. It's
reasonable to start with values of 5 or 10 for each of them and then experiment
to see which of them help with your application.
randomly mirror half of the images horizontally, which makes sense as long as
those inversions are likely to happen in your application. For example it
wouldn't be a good idea if you were trying to recognize letters, since flipping
them destroys their meaning.
There are several other parameters you can try adjusting to see if they help
your results. The
--learning_rate controls the magnitude of the updates to the
final layer during training. Intuitively if this is smaller then the learning
will take longer, but it can end up helping the overall precision. That's not
always the case though, so you need to experiment carefully to see what works
for your case. The
--train_batch_size controls how many images are examined
during one training step, and because the learning rate is applied per batch
you'll need to reduce it if you have larger batches to get the same overall
Training, Validation, and Testing Sets
One of the things the script does under the hood when you point it at a folder of images is divide them up into three different sets. The largest is usually the training set, which are all the images fed into the network during training, with the results used to update the model's weights. You might wonder why we don't use all the images for training? A big potential problem when we're doing machine learning is that our model may just be memorizing irrelevant details of the training images to come up with the right answers. For example, you could imagine a network remembering a pattern in the background of each photo it was shown, and using that to match labels with objects. It could produce good results on all the images it's seen before during training, but then fail on new images because it's not learned general characteristics of the objects, just memorized unimportant details of the training images.
This problem is known as overfitting, and to avoid it we keep some of our data
out of the training process, so that the model can't memorize them. We then use
those images as a check to make sure that overfitting isn't occurring, since if
we see good accuracy on them it's a good sign the network isn't overfitting. The
usual split is to put 80% of the images into the main training set, keep 10%
aside to run as validation frequently during training, and then have a final 10%
that are used less often as a testing set to predict the real-world performance
of the classifier. These ratios can be controlled using the
--validation_percentage flags. In general
you should be able to leave these values at their defaults, since you won't
usually find any advantage to training to adjusting them.
Note that the script uses the image filenames (rather than a completely random function) to divide the images among the training, validation, and test sets. This is done to ensure that images don't get moved between training and testing sets on different runs, since that could be a problem if images that had been used for training a model were subsequently used in a validation set.
You might notice that the validation accuracy fluctuates among iterations. Much
of this fluctuation arises from the fact that a random subset of the validation
set is chosen for each validation accuracy measurement. The fluctuations can be
greatly reduced, at the cost of some increase in training time, by choosing
--validation_batch_size=-1, which uses the entire validation set for each
Once training is complete, you may find it insightful to examine misclassified
images in the test set. This can be done by adding the flag
--print_misclassified_test_images. This may help you get a feeling for which
types of images were most confusing for the model, and which categories were
most difficult to distinguish. For instance, you might discover that some
subtype of a particular category, or some unusual photo angle, is particularly
difficult to identify, which may encourage you to add more training images of
that subtype. Oftentimes, examining misclassified images can also point to
errors in the input data set, such as mislabeled, low-quality, or ambiguous
images. However, one should generally avoid point-fixing individual errors in
the test set, since they are likely to merely reflect more general problems in
the (much larger) training set.