The requirements for storing model information during training are very different from when you want to release it as part of a mobile app. This section covers the tools involved in converting from a training model to something releasable in production.
What is up with all the different saved file formats?
You may find yourself getting very confused by all the different ways that TensorFlow can save out graphs. To help, here’s a rundown of some of the different components, and what they are used for. The objects are mostly defined and serialized as protocol buffers:
NodeDef: Defines a single operation in a model. It has a unique name, a list of the names of other nodes it pulls inputs from, the operation type it implements (for example
Mul), and any attributes that are needed to control that operation. This is the basic unit of computation for TensorFlow, and all work is done by iterating through a network of these nodes, applying each one in turn. One particular operation type that’s worth knowing about is
Const, since this holds information about a constant. This may be a single, scalar number or string, but it can also hold an entire multi-dimensional tensor array. The values for a
Constare stored inside the
NodeDef, and so large constants can take up a lot of room when serialized.
Checkpoint. Another way of storing values for a model is by using
Constops, these don’t store their content as part of the
NodeDef, so they take up very little space within the
GraphDeffile. Instead their values are held in RAM while a computation is running, and then saved out to disk as checkpoint files periodically. This typically happens as a neural network is being trained and weights are updated, so it’s a time-critical operation, and it may happen in a distributed fashion across many workers, so the file format has to be both fast and flexible. They are stored as multiple checkpoint files, together with metadata files that describe what’s contained within the checkpoints. When you’re referring to a checkpoint in the API (for example when passing a filename in as a command line argument), you’ll use the common prefix for a set of related files. If you had these files:
/tmp/model/model-chkpt-1000.data-00000-of-00002 /tmp/model/model-chkpt-1000.data-00001-of-00002 /tmp/model/model-chkpt-1000.index /tmp/model/model-chkpt-1000.meta
You would refer to them as
GraphDef: Has a list of
NodeDefs, which together define the computational graph to execute. During training, some of these nodes will be
Variables, and so if you want to have a complete graph you can run, including the weights, you’ll need to call a restore operation to pull those values from checkpoints. Because checkpoint loading has to be flexible to deal with all of the training requirements, this can be tricky to implement on mobile and embedded devices, especially those with no proper file system available like iOS. This is where the
freeze_graph.pyscript comes in handy. As mentioned above,
Constops store their values as part of the
NodeDef, so if all the
Variableweights are converted to
Constnodes, then we only need a single
GraphDeffile to hold the model architecture and the weights. Freezing the graph handles the process of loading the checkpoints, and then converts all Consts to Variables. You can then load the resulting file in a single call, without having to restore variable values from checkpoints. One thing to watch out for with
GraphDeffiles is that sometimes they’re stored in text format for easy inspection. These versions usually have a ‘.pbtxt’ filename suffix, whereas the binary files end with ‘.pb’.
FunctionDefLibrary: This appears in
GraphDef, and is effectively a set of sub-graphs, each with information about their input and output nodes. Each sub-graph can then be used as an op in the main graph, allowing easy instantiation of different nodes, in a similar way to how functions encapsulate code in other languages.
MetaGraphDef: A plain
GraphDefonly has information about the network of computations, but doesn’t have any extra information about the model or how it can be used.
GraphDefdefining the computation part of the model, but also includes information like ‘signatures’, which are suggestions about which inputs and outputs you may want to call the model with, data on how and where any checkpoint files are saved, and convenience tags for grouping ops together for ease of use.
SavedModel: It’s common to want to have different versions of a graph that rely on a common set of variable checkpoints. For example, you might need a GPU and a CPU version of the same graph, but keep the same weights for both. You might also need some extra files (like label names) as part of your model. The SavedModel format addresses these needs by letting you save multiple versions of the same graph without duplicating variables, and also storing asset files in the same bundle. Under the hood, it uses
MetaGraphDefand checkpoint files, along with extra metadata files. It’s the format that you’ll want to use if you’re deploying a web API using TensorFlow Serving, for example.
How do you get a model you can use on mobile?
In most situations, training a model with TensorFlow will give you a folder
GraphDef file (usually ending with the
.pbtxt extension) and
a set of checkpoint files. What you need for mobile or embedded deployment is a
GraphDef file that’s been ‘frozen’, or had its variables converted into
inline constants so everything’s in one file. To handle the conversion, you’ll
freeze_graph.py script, that’s held in
tensorflow/python/tools/freeze_graph.py. You’ll run it like this:
bazel build tensorflow/tools:freeze_graph bazel-bin/tensorflow/tools/freeze_graph \ --input_graph=/tmp/model/my_graph.pb \ --input_checkpoint=/tmp/model/model.ckpt-1000 \ --output_graph=/tmp/frozen_graph.pb \ --output_node_names=output_node \
input_graph argument should point to the
GraphDef file that holds your
model architecture. It’s possible that your
GraphDef has been stored in a text
format on disk, in which case it’s likely to end in
.pbtxt instead of
and you should add an extra
--input_binary=false flag to the command.
input_checkpoint should be the most recent saved checkpoint. As mentioned
in the checkpoint section, you need to give the common prefix to the set of
checkpoints here, rather than a full filename.
output_graph defines where the resulting frozen
GraphDef will be
saved. Because it’s likely to contain a lot of weight values that take up a
large amount of space in text format, it’s always saved as a binary protobuf.
output_node_names is a list of the names of the nodes that you want to extract
the results of your graph from. This is needed because the freezing process
needs to understand which parts of the graph are actually needed, and which are
artifacts of the training process, like summarization ops. Only ops that
contribute to calculating the given output nodes will be kept. If you know how
your graph is going to be used, these should just be the names of the nodes you
Session::Run() as your fetch targets. The easiest way to find the
node names is to inspect the Node objects while building your graph in python.
Inspecting your graph in TensorBoard is another simple way. You can get some
suggestions on likely outputs by running the
Because the output format for TensorFlow has changed over time, there are a
variety of other less commonly used flags available too, like
hopefully you shouldn’t need these on graphs trained with modern versions of the
Using the Graph Transform Tool
A lot of the things you need to do to efficiently run a model on device are
available through the Graph Transform
command-line tool takes an input
GraphDef file, applies the set of rewriting
rules you request, and then writes out the result as a
GraphDef. See the
documentation for more information on how to build and run this tool.
Removing training-only nodes
GraphDefs produced by the training code contain all of the
computation that’s needed for back-propagation and updates of weights, as well
as the queuing and decoding of inputs, and the saving out of checkpoints. All of
these nodes are no longer needed during inference, and some of the operations
like checkpoint saving aren’t even supported on mobile platforms. To create a
model file that you can load on devices you need to delete those unneeded
operations by running the
strip_unused_nodes rule in the Graph Transform Tool.
The trickiest part of this process is figuring out the names of the nodes you want to use as inputs and outputs during inference. You'll need these anyway once you start to run inference, but you also need them here so that the transform can calculate which nodes are not needed on the inference-only path. These may not be obvious from the training code. The easiest way to determine the node name is to explore the graph with TensorBoard.
Remember that mobile applications typically gather their data from sensors and
have it as arrays in memory, whereas training typically involves loading and
decoding representations of the data stored on disk. In the case of Inception v3
for example, there’s a
DecodeJpeg op at the start of the graph that’s designed
to take JPEG-encoded data from a file retrieved from disk and turn it into an
arbitrary-sized image. After that there’s a
BilinearResize op to scale it to
the expected size, followed by a couple of other ops that convert the byte data
into float and scale the value magnitudes it in the way the rest of the graph
expects. A typical mobile app will skip most of these steps because it’s getting
its input directly from a live camera, so the input node you will actually
supply will be the output of the
Mul node in this case.
You’ll need to do a similar process of inspection to figure out the correct output nodes.
If you’ve just been given a frozen
GraphDef file, and are not sure about the
contents, try using the
summarize_graph tool to print out information
about the inputs and outputs it finds from the graph structure. Here’s an
example with the original Inception v3 file:
bazel run tensorflow/tools/graph_transforms:summarize_graph -- --in_graph=tensorflow_inception_graph.pb
Once you have an idea of what the input and output nodes are, you can feed them
into the graph transform tool as the
arguments, and call the
strip_unused_nodes transform, like this:
bazel run tensorflow/tools/graph_transforms:transform_graph -- --in_graph=tensorflow_inception_graph.pb --out_graph=optimized_inception_graph.pb --inputs='Mul' --outputs='softmax' --transforms=' strip_unused_nodes(type=float, shape="1,299,299,3") fold_constants(ignore_errors=true) fold_batch_norms fold_old_batch_norms'
One thing to look out for here is that you need to specify the size and type
that you want your inputs to be. This is because any values that you’re going to
be passing in as inputs to inference need to be fed to special
nodes, and the transform may need to create them if they don’t already exist. In
the case of Inception v3 for example, a
Placeholder node replaces the old
Mul node that used to output the resized and rescaled image array, since we’re
going to be doing that processing ourselves before we call TensorFlow. It keeps
the original name though, which is why we always feed in inputs to
Mul when we
run a session with our modified Inception graph.
After you’ve run this process, you’ll have a graph that only contains the actual
nodes you need to run your prediction process. This is the point where it
becomes useful to run metrics on the graph, so it’s worth running
summarize_graph again to understand what’s in your model.
What ops should you include on mobile?
There are hundreds of operations available in TensorFlow, and each one has multiple implementations for different data types. On mobile platforms, the size of the executable binary that’s produced after compilation is important, because app download bundles need to be as small as possible for the best user experience. If all of the ops and data types are compiled into the TensorFlow library then the total size of the compiled library can be tens of megabytes, so by default only a subset of ops and data types are included.
That means that if you load a model file that’s been trained on a desktop machine, you may see the error “No OpKernel was registered to support Op” when you load it on mobile. The first thing to try is to make sure you’ve stripped out any training-only nodes, since the error will occur at load time even if the op is never executed. If you’re still hitting the same problem once that’s done, you’ll need to look at adding the op to your built library.
The criteria for including ops and types fall into several categories:
Are they only useful in back-propagation, for gradients? Since mobile is focused on inference, we don’t include these.
Are they useful mainly for other training needs, such as checkpoint saving? These we leave out.
Do they rely on frameworks that aren’t always available on mobile, such as libjpeg? To avoid extra dependencies we don’t include ops like
Are there types that aren’t commonly used? We don’t include boolean variants of ops for example, since we don’t see much use of them in typical inference graphs.
These ops are trimmed by default to optimize for inference on mobile, but it is possible to alter some build files to change the default. After alternating the build files, you will need to recompile TensorFlow. See below for more details on how to do this, and also see Optimizing for more on reducing your binary size.
Locate the implementation
Operations are broken into two parts. The first is the op definition, which
declares the signature of the operation, which inputs, outputs, and attributes
it has. These take up very little space, and so all are included by default. The
implementations of the op computations are done in kernels, which live in the
tensorflow/core/kernels folder. You need to compile the C++ file containing
the kernel implementation of the op you need into the library. To figure out
which file that is, you can search for the operation name in the source
You’ll see that this search is looking for the
Mul op implementation, and it
finds it in
tensorflow/core/kernels/cwise_op_mul_1.cc. You need to look for
macros beginning with
REGISTER, with the op name you care about as one of the
In this case, the implementations are actually broken up across multiple
files, so you’d need to include all of them in your build. If you’re more
comfortable using the command line for code search, here’s a grep command that
also locates the right files if you run it from the root of your TensorFlow
grep 'REGISTER.*"Mul"' tensorflow/core/kernels/*.cc
Add the implementation to the build
If you’re using Bazel, and building for Android, you’ll want to add the files
you’ve found to
android_extended_ops_group2 targets. You
may also need to include any .cc files they depend on in there. If the build
complains about missing header files, add the .h’s that are needed into
If you’re using a makefile targeting iOS, Raspberry Pi, etc, go to
add the right implementation files there.