tf.contrib.layers.GDN

Class GDN

Inherits From: Layer

Generalized divisive normalization layer.

Based on the papers:

"Density Modeling of Images using a Generalized Normalization Transformation"

Johannes Ballé, Valero Laparra, Eero P. Simoncelli

https://arxiv.org/abs/1511.06281

"End-to-end Optimized Image Compression"

Johannes Ballé, Valero Laparra, Eero P. Simoncelli

https://arxiv.org/abs/1611.01704

Implements an activation function that is essentially a multivariate generalization of a particular sigmoid-type function:

y[i] = x[i] / sqrt(beta[i] + sum_j(gamma[j, i] * x[j]))


where i and j run over channels. This implementation never sums across spatial dimensions. It is similar to local response normalization, but much more flexible, as beta and gamma are trainable parameters.

Arguments:

• inverse: If False (default), compute GDN response. If True, compute IGDN response (one step of fixed point iteration to invert GDN; the division is replaced by multiplication).
• beta_min: Lower bound for beta, to prevent numerical error from causing square root of zero or negative values.
• gamma_init: The gamma matrix will be initialized as the identity matrix multiplied with this value. If set to zero, the layer is effectively initialized to the identity operation, since beta is initialized as one. A good default setting is somewhere between 0 and 0.5.
• reparam_offset: Offset added to the reparameterization of beta and gamma. The reparameterization of beta and gamma as their square roots lets the training slow down when their values are close to zero, which is desirable as small values in the denominator can lead to a situation where gradient noise on beta/gamma leads to extreme amounts of noise in the GDN activations. However, without the offset, we would get zero gradients if any elements of beta or gamma were exactly zero, and thus the training could get stuck. To prevent this, we add this small constant. The default value was empirically determined as a good starting point. Making it bigger potentially leads to more gradient noise on the activations, making it too small may lead to numerical precision issues.
• data_format: Format of input tensor. Currently supports 'channels_first' and 'channels_last'.
• activity_regularizer: Regularizer function for the output.
• trainable: Boolean, if True, also add variables to the graph collection GraphKeys.TRAINABLE_VARIABLES (see tf.Variable).
• name: String, the name of the layer. Layers with the same name will share weights, but to avoid mistakes we require reuse=True in such cases.

Properties: * inverse: Boolean, whether GDN is computed (True) or IGDN (False). * data_format: Format of input tensor. Currently supports 'channels_first' and 'channels_last'. * beta: The beta parameter as defined above (1D Tensor). * gamma: The gamma parameter as defined above (2D Tensor).

Properties

activity_regularizer

Optional regularizer function for the output of this layer.

inbound_nodes

Deprecated, do NOT use! Only for compatibility with external Keras.

input

Retrieves the input tensor(s) of a layer.

Only applicable if the layer has exactly one input, i.e. if it is connected to one incoming layer.

Returns:

Input tensor or list of input tensors.

Raises:

• AttributeError: if the layer is connected to more than one incoming layers.

Raises:

• RuntimeError: If called in Eager mode.
• AttributeError: If no inbound nodes are found.

input_shape

Retrieves the input shape(s) of a layer.

Only applicable if the layer has exactly one input, i.e. if it is connected to one incoming layer, or if all inputs have the same shape.

Returns:

Input shape, as an integer shape tuple (or list of shape tuples, one tuple per input tensor).

Raises:

• AttributeError: if the layer has no defined input_shape.
• RuntimeError: if called in Eager mode.

losses

Losses which are associated with this Layer.

Note that when executing eagerly, getting this property evaluates regularizers. When using graph execution, variable regularization ops have already been created and are simply returned here.

Returns:

A list of tensors.

outbound_nodes

Deprecated, do NOT use! Only for compatibility with external Keras.

output

Retrieves the output tensor(s) of a layer.

Only applicable if the layer has exactly one output, i.e. if it is connected to one incoming layer.

Returns:

Output tensor or list of output tensors.

Raises:

• AttributeError: if the layer is connected to more than one incoming layers.
• RuntimeError: if called in Eager mode.

output_shape

Retrieves the output shape(s) of a layer.

Only applicable if the layer has one output, or if all outputs have the same shape.

Returns:

Output shape, as an integer shape tuple (or list of shape tuples, one tuple per output tensor).

Raises:

• AttributeError: if the layer has no defined output shape.
• RuntimeError: if called in Eager mode.

variables

Returns the list of all layer variables/weights.

Returns:

A list of variables.

weights

Returns the list of all layer variables/weights.

Returns:

A list of variables.

Methods

__init__

__init__(
inverse=False,
beta_min=1e-06,
gamma_init=0.1,
reparam_offset=(2 ** -18),
data_format='channels_last',
activity_regularizer=None,
trainable=True,
name=None,
**kwargs
)


__call__

__call__(
inputs,
*args,
**kwargs
)


Wraps call, applying pre- and post-processing steps.

Arguments:

• inputs: input tensor(s).
• *args: additional positional arguments to be passed to self.call.
• **kwargs: additional keyword arguments to be passed to self.call. Note: kwarg scope is reserved for use by the layer.

Returns:

Output tensor(s).

Raises:

• ValueError: if the layer's call method returns None (an invalid value).

__deepcopy__

__deepcopy__(memo)


add_loss

add_loss(
losses,
inputs=None
)


Add loss tensor(s), potentially dependent on layer inputs.

Some losses (for instance, activity regularization losses) may be dependent on the inputs passed when calling a layer. Hence, when reusing the same layer on different inputs a and b, some entries in layer.losses may be dependent on a and some on b. This method automatically keeps track of dependencies.

The get_losses_for method allows to retrieve the losses relevant to a specific set of inputs.

Note that add_loss is not supported when executing eagerly. Instead, variable regularizers may be added through add_variable. Activity regularization is not supported directly (but such losses may be returned from Layer.call()).

Arguments:

• losses: Loss tensor, or list/tuple of tensors.
• inputs: If anything other than None is passed, it signals the losses are conditional on some of the layer's inputs, and thus they should only be run where these inputs are available. This is the case for activity regularization losses, for instance. If None is passed, the losses are assumed to be unconditional, and will apply across all dataflows of the layer (e.g. weight regularization losses).

Raises:

• RuntimeError: If called in Eager mode.

add_update

add_update(
inputs=None
)


Add update op(s), potentially dependent on layer inputs.

Weight updates (for instance, the updates of the moving mean and variance in a BatchNormalization layer) may be dependent on the inputs passed when calling a layer. Hence, when reusing the same layer on different inputs a and b, some entries in layer.updates may be dependent on a and some on b. This method automatically keeps track of dependencies.

The get_updates_for method allows to retrieve the updates relevant to a specific set of inputs.

This call is ignored in Eager mode.

Arguments:

• updates: Update op, or list/tuple of update ops.
• inputs: If anything other than None is passed, it signals the updates are conditional on some of the layer's inputs, and thus they should only be run where these inputs are available. This is the case for BatchNormalization updates, for instance. If None, the updates will be taken into account unconditionally, and you are responsible for making sure that any dependency they might have is available at runtime. A step counter might fall into this category.

add_variable

add_variable(
name,
shape,
dtype=None,
initializer=None,
regularizer=None,
trainable=True,
constraint=None,
partitioner=None
)


Adds a new variable to the layer, or gets an existing one; returns it.

Arguments:

• name: variable name.
• shape: variable shape.
• dtype: The type of the variable. Defaults to self.dtype or float32.
• initializer: initializer instance (callable).
• regularizer: regularizer instance (callable).
• trainable: whether the variable should be part of the layer's "trainable_variables" (e.g. variables, biases) or "non_trainable_variables" (e.g. BatchNorm mean, stddev). Note, if the current variable scope is marked as non-trainable then this parameter is ignored and any added variables are also marked as non-trainable.
• constraint: constraint instance (callable).
• partitioner: (optional) partitioner instance (callable). If provided, when the requested variable is created it will be split into multiple partitions according to partitioner. In this case, an instance of PartitionedVariable is returned. Available partitioners include tf.fixed_size_partitioner and tf.variable_axis_size_partitioner. For more details, see the documentation of tf.get_variable and the "Variable Partitioners and Sharding" section of the API guide.

Returns:

The created variable. Usually either a Variable or ResourceVariable instance. If partitioner is not None, a PartitionedVariable instance is returned.

Raises:

• RuntimeError: If called with partioned variable regularization and eager execution is enabled.

apply

apply(
inputs,
*args,
**kwargs
)


Apply the layer on a input.

This simply wraps self.__call__.

Arguments:

• inputs: Input tensor(s).
• *args: additional positional arguments to be passed to self.call.
• **kwargs: additional keyword arguments to be passed to self.call.

Returns:

Output tensor(s).

build

build(input_shape)


call

call(inputs)


compute_output_shape

compute_output_shape(input_shape)


count_params

count_params()


Count the total number of scalars composing the weights.

Returns:

An integer count.

Raises:

• ValueError: if the layer isn't yet built (in which case its weights aren't yet defined).

get_input_at

get_input_at(node_index)


Retrieves the input tensor(s) of a layer at a given node.

Arguments:

• node_index: Integer, index of the node from which to retrieve the attribute. E.g. node_index=0 will correspond to the first time the layer was called.

Returns:

A tensor (or list of tensors if the layer has multiple inputs).

Raises:

• RuntimeError: If called in Eager mode.

get_input_shape_at

get_input_shape_at(node_index)


Retrieves the input shape(s) of a layer at a given node.

Arguments:

• node_index: Integer, index of the node from which to retrieve the attribute. E.g. node_index=0 will correspond to the first time the layer was called.

Returns:

A shape tuple (or list of shape tuples if the layer has multiple inputs).

Raises:

• RuntimeError: If called in Eager mode.

get_losses_for

get_losses_for(inputs)


Retrieves losses relevant to a specific set of inputs.

Arguments:

• inputs: Input tensor or list/tuple of input tensors.

Returns:

List of loss tensors of the layer that depend on inputs.

Raises:

• RuntimeError: If called in Eager mode.

get_output_at

get_output_at(node_index)


Retrieves the output tensor(s) of a layer at a given node.

Arguments:

• node_index: Integer, index of the node from which to retrieve the attribute. E.g. node_index=0 will correspond to the first time the layer was called.

Returns:

A tensor (or list of tensors if the layer has multiple outputs).

Raises:

• RuntimeError: If called in Eager mode.

get_output_shape_at

get_output_shape_at(node_index)


Retrieves the output shape(s) of a layer at a given node.

Arguments:

• node_index: Integer, index of the node from which to retrieve the attribute. E.g. node_index=0 will correspond to the first time the layer was called.

Returns:

A shape tuple (or list of shape tuples if the layer has multiple outputs).

Raises:

• RuntimeError: If called in Eager mode.

get_updates_for

get_updates_for(inputs)


Retrieves updates relevant to a specific set of inputs.

Arguments:

• inputs: Input tensor or list/tuple of input tensors.

Returns:

List of update ops of the layer that depend on inputs.

Raises:

• RuntimeError: If called in Eager mode.