tfc.layers.SignalConv3D

3D convolution layer.

This layer creates a filter kernel that is convolved or cross correlated with the layer input to produce an output tensor. The main difference of this class to tf.layers.Conv3D is how padding, up- and downsampling, and alignment is handled. It supports much more flexible options for structuring the linear transform.

In general, the outputs are equivalent to a composition of:

  1. an upsampling step (if strides_up > 1)
  2. a convolution or cross correlation
  3. a downsampling step (if strides_down > 1)
  4. addition of a bias vector (if use_bias == True)
  5. a pointwise nonlinearity (if activation is not None)

For more information on what the difference between convolution and cross correlation is, see this and this Wikipedia article, respectively. Note that the distinction between convolution and cross correlation is occasionally blurred (one may use convolution as an umbrella term for both). For a discussion of up-/downsampling, refer to the articles about upsampling and decimation. A more in-depth treatment of all of these operations can be found in:

"Discrete-Time Signal Processing"
Oppenheim, Schafer, Buck (Prentice Hall)

For purposes of this class, the center position of a kernel is always considered to be at K // 2, where K is the support length of the kernel. This implies that in the 'same_*' padding modes, all of the following operations will produce the same result if applied to the same inputs, which is not generally true for convolution operations as implemented by tf.nn.convolution or tf.layers.Conv?D (numbers represent kernel coefficient values):

  • convolve with [1, 2, 3]
  • convolve with [0, 1, 2, 3, 0]
  • convolve with [0, 1, 2, 3]
  • correlate with [3, 2, 1]
  • correlate with [0, 3, 2, 1, 0]
  • correlate with [0, 3, 2, 1]

Available padding (boundary handling) modes:

  • 'valid': This always yields the maximum number of output samples that can be computed without making any assumptions about the values outside of the support of the input tensor. The padding semantics are always applied to the inputs. In contrast, even though tf.nn.conv2d_transpose implements upsampling, in 'VALID' mode it will produce an output tensor with larger support than the input tensor (because it is the transpose of a 'VALID' downsampled convolution).

    Examples (numbers represent indexes into the respective tensors, periods represent skipped spatial positions):

    kernel_support = 5 and strides_down = 2:

    inputs:  |0 1 2 3 4 5 6 7 8|
    outputs: |    0 . 1 . 2    |
    
    inputs:  |0 1 2 3 4 5 6 7|
    outputs: |    0 . 1 .    |
    

    kernel_support = 3, strides_up = 2, and extra_pad_end = True:

    inputs:   |0 . 1 . 2 . 3 . 4 .|
    outputs:  |  0 1 2 3 4 5 6 7  |
    

    kernel_support = 3, strides_up = 2, and extra_pad_end = False:

    inputs:   |0 . 1 . 2 . 3 . 4|
    outputs:  |  0 1 2 3 4 5 6  |
    
  • 'same_zeros': Values outside of the input tensor support are assumed to be zero. Similar to 'SAME' in tf.nn.convolution, but with different padding. In 'SAME', the spatial alignment of the output depends on the input shape. Here, the output alignment depends only on the kernel support and the strides, making alignment more predictable. The first sample in the output is always spatially aligned with the first sample in the input.

    Examples (numbers represent indexes into the respective tensors, periods represent skipped spatial positions):

    kernel_support = 5 and strides_down = 2:

    inputs:  |0 1 2 3 4 5 6 7 8|
    outputs: |0 . 1 . 2 . 3 . 4|
    
    inputs:  |0 1 2 3 4 5 6 7|
    outputs: |0 . 1 . 2 . 3 .|
    

    kernel_support = 3, strides_up = 2, and extra_pad_end = True:

    inputs:   |0 . 1 . 2 . 3 . 4 .|
    outputs:  |0 1 2 3 4 5 6 7 8 9|
    

    kernel_support = 3, strides_up = 2, and extra_pad_end = False:

    inputs:   |0 . 1 . 2 . 3 . 4|
    outputs:  |0 1 2 3 4 5 6 7 8|
    
  • 'same_reflect': Values outside of the input tensor support are assumed to be reflections of the samples inside. Note that this is the same padding as implemented by tf.pad in the 'REFLECT' mode (i.e. with the symmetry axis on the samples rather than between). The output alignment is identical to the 'same_zeros' mode.

    Examples: see 'same_zeros'.

    When applying several convolutions with down- or upsampling in a sequence, it can be helpful to keep the axis of symmetry for the reflections consistent. To do this, set extra_pad_end = False and make sure that the input has length M, such that M % S == 1, where S is the product of stride lengths of all subsequent convolutions. Example for subsequent downsampling (here, M = 9, S = 4, and ^ indicate the symmetry axes for reflection):

    inputs:       |0 1 2 3 4 5 6 7 8|
    intermediate: |0 . 1 . 2 . 3 . 4|
    outputs:      |0 . . . 1 . . . 2|
                   ^               ^
    

Note that due to limitations of the underlying operations, not all combinations of arguments are currently implemented. In this case, this class will throw a NotImplementedError exception.

Speed tips:

  • Prefer combining correlations with downsampling, and convolutions with upsampling, as the underlying ops implement these combinations directly.
  • If that isn't desirable, prefer using odd-length kernel supports, since odd-length kernels can be flipped if necessary, to use the fastest implementation available.
  • Combining upsampling and downsampling (for rational resampling ratios) is relatively slow, because no underlying ops exist for that use case. Downsampling in this case is implemented by discarding computed output values.
  • Note that channel_separable is only implemented for 1D and 2D. Also, upsampled channel-separable convolutions are currently only implemented for filters == 1. When using channel_separable, prefer using identical strides in all dimensions to maximize performance.

filters Integer. Initial value of eponymous attribute.
kernel_support Integer or iterable of integers. Initial value of eponymous attribute.
corr Boolean. Initial value of eponymous attribute.
strides_down Integer or iterable of integers. Initial value of eponymous attribute.
strides_up Integer or iterable of integers. Initial value of eponymous attribute.
padding String. Initial value of eponymous attribute.
extra_pad_end Boolean or None. Initial value of eponymous attribute.
channel_separable Boolean. Initial value of eponymous attribute.
data_format String. Initial value of eponymous attribute.
activation Callable or None. Initial value of eponymous attribute.
use_bias Boolean. Initial value of eponymous attribute.
use_explicit Boolean. Initial value of eponymous attribute.
kernel_parameter Tensor, tf.Variable, callable, 'rdft', or 'variable'. Initial value of eponymous attribute.
bias_parameter Tensor, tf.Variable, callable, or 'variable'. Initial value of eponymous attribute.
kernel_initializer Initializer object. Initial value of eponymous attribute.
bias_initializer Initializer object. Initial value of eponymous attribute.
kernel_regularizer Regularizer object or None. Initial value of eponymous attribute.
bias_regularizer Regularizer object or None. Initial value of eponymous attribute.
**kwargs Keyword arguments passed to superclass (Layer).

filters Integer. If not channel_separable, specifies the total number of filters, which is equal to the number of output channels. Otherwise, specifies the number of filters per channel, which makes the number of output channels equal to filters times the number of input channels.
kernel_support An integer or iterable of 3 integers, specifying the length of the convolution/correlation window in each dimension.
corr Boolean. If True, compute cross correlation. If False, convolution.
strides_down An integer or iterable of 3 integers, specifying an optional downsampling stride after the convolution/correlation.
strides_up An integer or iterable of 3 integers, specifying an optional upsampling stride before the convolution/correlation.
padding String. One of the supported padding modes (see above).
extra_pad_end Boolean or None. When upsampling, use extra skipped samples at the end of each dimension. None implies True for same_* padding modes, and False for valid. For examples, refer to the discussion of padding modes above.
channel_separable Boolean. If False, each output channel is computed by summing over all filtered input channels. If True, each output channel is computed from only one input channel, and filters specifies the number of filters per channel. The output channels are ordered such that the first block of filters channels is computed from the first input channel, the second block from the second input channel, etc.
data_format String, one of 'channels_last' or 'channels_first'. The ordering of the input dimensions. 'channels_last' corresponds to input tensors with shape (batch, ..., channels), while 'channels_first' corresponds to input tensors with shape (batch, channels, ...).
activation Activation function or None.
use_bias Boolean, whether an additive constant will be applied to each output channel.
use_explicit Boolean, whether to use EXPLICIT padding mode (supported in TensorFlow >1.14).
kernel_parameter Tensor, tf.Variable, callable, or one of the strings 'rdft', 'variable'. A tf.Tensor means that the kernel is fixed, a tf.Variable that it is trained. A callable can be used to determine the value of the kernel as a function of some other variable or tensor. This can be a Parameter object. 'rdft' means that when the layer is built, a RDFTParameter object is created to train the kernel. 'variable' means that when the layer is built, a tf.Variable is created to train the kernel. Note that certain choices here such as tf.Tensors or lambda functions may prevent JSON-style serialization (Parameter objects and tf.Variables work).
bias_parameter Tensor, tf.Variable, callable, or the string 'variable'. A tf.Tensor means that the bias is fixed, a tf.Variable that it is trained. A callable can be used to determine the value of the bias as a function of some other variable or tensor. This can be a Parameter object. 'variable' means that when the layer is built, a tf.Variable is created to train the bias. Note that certain choices here such as tf.Tensors or lambda functions may prevent JSON-style serialization (Parameter objects and tf.Variables work).
kernel_initializer Initializer object for the filter kernel.
bias_initializer Initializer object for the bias vector.
kernel_regularizer Regularizer object or None. Optional regularizer for the filter kernel.
bias_regularizer Regularizer object or None. Optional regularizer for the bias vector.
kernel tf.Tensor. Read-only property always returning the current kernel tensor.
bias tf.Tensor. Read-only property always returning the current bias tensor.
activity_regularizer Optional regularizer function for the output of this layer.
compute_dtype The dtype of the layer's computations.

This is equivalent to Layer.dtype_policy.compute_dtype. Unless mixed precision is used, this is the same as Layer.dtype, the dtype of the weights.

Layers automatically cast their inputs to the compute dtype, which causes computations and the output to be in the compute dtype as well. This is done by the base Layer class in Layer.call, so you do not have to insert these casts if implementing your own layer.

Layers often perform certain internal computations in higher precision when compute_dtype is float16 or bfloat16 for numeric stability. The output will still typically be float16 or bfloat16 in such cases.

dtype The dtype of the layer weights.

This is equivalent to Layer.dtype_policy.variable_dtype. Unless mixed precision is used, this is the same as Layer.compute_dtype, the dtype of the layer's computations.

dtype_policy The dtype policy associated with this layer.

This is an instance of a tf.keras.mixed_precision.Policy.

dynamic Whether the layer is dynamic (eager-only); set in the constructor.
input Retrieves the input tensor(s) of a layer.

Only applicable if the layer has exactly one input, i.e. if it is connected to one incoming layer.

input_spec InputSpec instance(s) describing the input format for this layer.

When you create a layer subclass, you can set self.input_spec to enable the layer to run input compatibility checks when it is called. Consider a Conv2D layer: it can only be called on a single input tensor of rank 4. As such, you can set, in __init__():

self.input_spec = tf.keras.layers.InputSpec(ndim=4)

Now, if you try to call the layer on an input that isn't rank 4 (for instance, an input of shape (2,), it will raise a nicely-formatted error:

ValueError: Input 0 of layer conv2d is incompatible with the layer:
expected ndim=4, found ndim=1. Full shape received: [2]

Input checks that can be specified via input_spec include:

  • Structure (e.g. a single input, a list of 2 inputs, etc)
  • Shape
  • Rank (ndim)
  • Dtype

For more information, see tf.keras.layers.InputSpec.

losses List of losses added using the add_loss() API.

Variable regularization tensors are created when this property is accessed, so it is eager safe: accessing losses under a tf.GradientTape will propagate gradients back to the corresponding variables.

class MyLayer(tf.keras.layers.Layer):
  def call(self, inputs):
    self.add_loss(tf.abs(tf.reduce_mean(inputs)))
    return inputs
l = MyLayer()
l(np.ones((10, 1)))
l.losses
[1.0]
inputs = tf.keras.Input(shape=(10,))
x = tf.keras.layers.Dense(10)(inputs)
outputs = tf.keras.layers.Dense(1)(x)
model = tf.keras.Model(inputs, outputs)
# Activity regularization.
len(model.losses)
0
model.add_loss(tf.abs(tf.reduce_mean(x)))
len(model.losses)
1
inputs = tf.keras.Input(shape=(10,))
d = tf.keras.layers.Dense(10, kernel_initializer='ones')
x = d(inputs)
outputs = tf.keras.layers.Dense(1)(x)
model = tf.keras.Model(inputs, outputs)
# Weight regularization.
model.add_loss(lambda: tf.reduce_mean(d.kernel))
model.losses
[<tf.Tensor: shape=(), dtype=float32, numpy=1.0>]

metrics List of metrics attached to the layer.
name Name of the layer (string), set in the constructor.
name_scope Returns a tf.name_scope instance for this class.
non_trainable_weights List of all non-trainable weights tracked by this layer.

Non-trainable weights are not updated during training. They are expected to be updated manually in call().

output Retrieves the output tensor(s) of a layer.

Only applicable if the layer has exactly one output, i.e. if it is connected to one incoming layer.

submodules Sequence of all sub-modules.

Submodules are modules which are properties of this module, or found as properties of modules which are properties of this module (and so on).

a = tf.Module()
b = tf.Module()
c = tf.Module()
a.b = b
b.c = c
list(a.submodules) == [b, c]
True
list(b.submodules) == [c]
True
list(c.submodules) == []
True

supports_masking Whether this layer supports computing a mask using compute_mask.
trainable

trainable_weights List of all trainable weights tracked by this layer.

Trainable weights are updated via gradient descent during training.

variable_dtype Alias of Layer.dtype, the dtype of the weights.
weights Returns the list of all layer variables/weights.

Methods

add_loss

Add loss tensor(s), potentially dependent on layer inputs.

Some losses (for instance, activity regularization losses) may be dependent on the inputs passed when calling a layer. Hence, when reusing the same layer on different inputs a and b, some entries in layer.losses may be dependent on a and some on b. This method automatically keeps track of dependencies.

This method can be used inside a subclassed layer or model's call function, in which case losses should be a Tensor or list of Tensors.

Example:

class MyLayer(tf.keras.layers.Layer):
  def call(self, inputs):
    self.add_loss(tf.abs(tf.reduce_mean(inputs)))
    return inputs

The same code works in distributed training: the input to add_loss() is treated like a regularization loss and averaged across replicas by the training loop (both built-in Model.fit() and compliant custom training loops).

The add_loss method can also be called directly on a Functional Model during construction. In this case, any loss Tensors passed to this Model must be symbolic and be able to be traced back to the model's Inputs. These losses become part of the model's topology and are tracked in get_config.

Example:

inputs = tf.keras.Input(shape=(10,))
x = tf.keras.layers.Dense(10)(inputs)
outputs = tf.keras.layers.Dense(1)(x)
model = tf.keras.Model(inputs, outputs)
# Activity regularization.
model.add_loss(tf.abs(tf.reduce_mean(x)))

If this is not the case for your loss (if, for example, your loss references a Variable of one of the model's layers), you can wrap your loss in a zero-argument lambda. These losses are not tracked as part of the model's topology since they can't be serialized.

Example:

inputs = tf.keras.Input(shape=(10,))
d = tf.keras.layers.Dense(10)
x = d(inputs)
outputs = tf.keras.layers.Dense(1)(x)
model = tf.keras.Model(inputs, outputs)
# Weight regularization.
model.add_loss(lambda: tf.reduce_mean(d.kernel))

Args
losses Loss tensor, or list/tuple of tensors. Rather than tensors, losses may also be zero-argument callables which create a loss tensor.
**kwargs Used for backwards compatibility only.

build

View source

Creates the variables of the layer (for subclass implementers).

This is a method that implementers of subclasses of Layer or Model can override if they need a state-creation step in-between layer instantiation and layer call. It is invoked automatically before the first execution of call().

This is typically used to create the weights of Layer subclasses (at the discretion of the subclass implementer).

Args
input_shape Instance of TensorShape, or list of instances of TensorShape if the layer expects a list of inputs (one instance per input).

build_from_config

Builds the layer's states with the supplied config dict.

By default, this method calls the build(config["input_shape"]) method, which creates weights based on the layer's input shape in the supplied config. If your config contains other information needed to load the layer's state, you should override this method.

Args
config Dict containing the input shape associated with this layer.

compute_mask

Computes an output mask tensor.

Args
inputs Tensor or list of tensors.
mask Tensor or list of tensors.

Returns
None or a tensor (or list of tensors, one per output tensor of the layer).

compute_output_shape

View source

Computes the output shape of the layer.

This method will cause the layer's state to be built, if that has not happened before. This requires that the layer will later be used with inputs that match the input shape provided here.

Args
input_shape Shape tuple (tuple of integers) or tf.TensorShape, or structure of shape tuples / tf.TensorShape instances (one per output tensor of the layer). Shape tuples can include None for free dimensions, instead of an integer.

Returns
A tf.TensorShape instance or structure of tf.TensorShape instances.

count_params

Count the total number of scalars composing the weights.

Returns
An integer count.

Raises
ValueError if the layer isn't yet built (in which case its weights aren't yet defined).

from_config

Creates a layer from its config.

This method is the reverse of get_config, capable of instantiating the same layer from the config dictionary. It does not handle layer connectivity (handled by Network), nor weights (handled by set_weights).

Args
config A Python dictionary, typically the output of get_config.

Returns
A layer instance.

get_build_config

Returns a dictionary with the layer's input shape.

This method returns a config dict that can be used by build_from_config(config) to create all states (e.g. Variables and Lookup tables) needed by the layer.

By default, the config only contains the input shape that the layer was built with. If you're writing a custom layer that creates state in an unusual way, you should override this method to make sure this state is already created when Keras attempts to load its value upon model loading.

Returns
A dict containing the input shape associated with the layer.

get_config

View source

Returns the config of the layer.

A layer config is a Python dictionary (serializable) containing the configuration of a layer. The same layer can be reinstantiated later (without its trained weights) from this configuration.

The config of a layer does not include connectivity information, nor the layer class name. These are handled by Network (one layer of abstraction above).

Note that get_config() does not guarantee to return a fresh copy of dict every time it is called. The callers should make a copy of the returned dict if they want to modify it.

Returns
Python dictionary.

get_weights

Returns the current weights of the layer, as NumPy arrays.

The weights of a layer represent the state of the layer. This function returns both trainable and non-trainable weight values associated with this layer as a list of NumPy arrays, which can in turn be used to load state into similarly parameterized layers.

For example, a Dense layer returns a list of two values: the kernel matrix and the bias vector. These can be used to set the weights of another Dense layer:

layer_a = tf.keras.layers.Dense(1,
  kernel_initializer=tf.constant_initializer(1.))
a_out = layer_a(tf.convert_to_tensor([[1., 2., 3.]]))
layer_a.get_weights()
[array([[1.],
       [1.],
       [1.]], dtype=float32), array([0.], dtype=float32)]
layer_b = tf.keras.layers.Dense(1,
  kernel_initializer=tf.constant_initializer(2.))
b_out = layer_b(tf.convert_to_tensor([[10., 20., 30.]]))
layer_b.get_weights()
[array([[2.],
       [2.],
       [2.]], dtype=float32), array([0.], dtype=float32)]
layer_b.set_weights(layer_a.get_weights())
layer_b.get_weights()
[array([[1.],
       [1.],
       [1.]], dtype=float32), array([0.], dtype=float32)]

Returns
Weights values as a list of NumPy arrays.

load_own_variables

Loads the state of the layer.

You can override this method to take full control of how the state of the layer is loaded upon calling keras.models.load_model().

Args
store Dict from which the state of the model will be loaded.

save_own_variables

Saves the state of the layer.

You can override this method to take full control of how the state of the layer is saved upon calling model.save().

Args
store Dict where the state of the model will be saved.

set_weights

Sets the weights of the layer, from NumPy arrays.

The weights of a layer represent the state of the layer. This function sets the weight values from numpy arrays. The weight values should be passed in the order they are created by the layer. Note that the layer's weights must be instantiated before calling this function, by calling the layer.

For example, a Dense layer returns a list of two values: the kernel matrix and the bias vector. These can be used to set the weights of another Dense layer:

layer_a = tf.keras.layers.Dense(1,
  kernel_initializer=tf.constant_initializer(1.))
a_out = layer_a(tf.convert_to_tensor([[1., 2., 3.]]))
layer_a.get_weights()
[array([[1.],
       [1.],
       [1.]], dtype=float32), array([0.], dtype=float32)]
layer_b = tf.keras.layers.Dense(1,
  kernel_initializer=tf.constant_initializer(2.))
b_out = layer_b(tf.convert_to_tensor([[10., 20., 30.]]))
layer_b.get_weights()
[array([[2.],
       [2.],
       [2.]], dtype=float32), array([0.], dtype=float32)]
layer_b.set_weights(layer_a.get_weights())
layer_b.get_weights()
[array([[1.],
       [1.],
       [1.]], dtype=float32), array([0.], dtype=float32)]

Args
weights a list of NumPy arrays. The number of arrays and their shape must match number of the dimensions of the weights of the layer (i.e. it should match the output of get_weights).

Raises
ValueError If the provided weights list does not match the layer's specifications.

with_name_scope

Decorator to automatically enter the module name scope.

class MyModule(tf.Module):
  @tf.Module.with_name_scope
  def __call__(self, x):
    if not hasattr(self, &#x27;w'):
      self.w = tf.Variable(tf.random.normal([x.shape[1], 3]))
    return tf.matmul(x, self.w)

Using the above module would produce tf.Variables and tf.Tensors whose names included the module name:

mod = MyModule()
mod(tf.ones([1, 2]))
<tf.Tensor: shape=(1, 3), dtype=float32, numpy=..., dtype=float32)>
mod.w
<tf.Variable &#x27;my_module/Variable:0' shape=(2, 3) dtype=float32,
numpy=..., dtype=float32)>

Args
method The method to wrap.

Returns
The original method wrapped such that it enters the module's name scope.

__call__

Wraps call, applying pre- and post-processing steps.

Args
*args Positional arguments to be passed to self.call.
**kwargs Keyword arguments to be passed to self.call.

Returns
Output tensor(s).

Note

  • The following optional keyword arguments are reserved for specific uses:
    • training: Boolean scalar tensor of Python boolean indicating whether the call is meant for training or inference.
    • mask: Boolean input mask.
  • If the layer's call method takes a mask argument (as some Keras layers do), its default value will be set to the mask generated for inputs by the previous layer (if input did come from a layer that generated a corresponding mask, i.e. if it came from a Keras layer with masking support.
  • If the layer is not built, the method will call build.

Raises
ValueError if the layer's call method returns None (an invalid value).
RuntimeError if super().__init__() was not called in the constructor.