DebugTensorWatchOrBuilder

الواجهة العامة DebugTensorWatchOrBuilder
الفئات الفرعية غير المباشرة المعروفة

الأساليب العامة

سلسلة مجردة
getDebugOps (فهرس كثافة العمليات) 
 Name(s) of the debugging op(s).
مجردة com.google.protobuf.ByteString
getDebugOpsBytes (فهرس كثافة العمليات) 
 Name(s) of the debugging op(s).
كثافة العمليات مجردة
getDebugOpsCount () 
 Name(s) of the debugging op(s).
قائمة مجردة <سلسلة>
getDebugOpsList () 
 Name(s) of the debugging op(s).
سلسلة مجردة
getDebugUrls (فهرس كثافة العمليات) 
 URL(s) for debug targets(s).
مجردة com.google.protobuf.ByteString
getDebugUrlsBytes (فهرس كثافة العمليات) 
 URL(s) for debug targets(s).
كثافة العمليات مجردة
getDebugUrlsCount () 
 URL(s) for debug targets(s).
قائمة مجردة <سلسلة>
getDebugUrlsList () 
 URL(s) for debug targets(s).
سلسلة مجردة
الحصول على اسم العقدة () 
 Name of the node to watch.
مجردة com.google.protobuf.ByteString
الحصول على NodeNameBytes () 
 Name of the node to watch.
كثافة العمليات مجردة
فتحة إخراج الإخراج () 
 Output slot to watch.
منطقية مجردة
getTolerateDebugOpCreationFailures () 
 Do not error out if debug op creation fails (e.g., due to dtype
 incompatibility).

الأساليب العامة

سلسلة getDebugOps مجردة عامة (مؤشر int) 

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}
repeated string debug_ops = 3;

الملخص العام com.google.protobuf.ByteString getDebugOpsBytes (مؤشر int) 

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}
repeated string debug_ops = 3;

الملخص العام int getDebugOpsCount () 

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}
repeated string debug_ops = 3;

قائمة مجردة عامة<String> getDebugOpsList () 

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}
repeated string debug_ops = 3;

سلسلة getDebugUrls مجردة عامة (فهرس كثافة العمليات) 

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.
repeated string debug_urls = 4;

الملخص العام com.google.protobuf.ByteString getDebugUrlsBytes (مؤشر int) 

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.
repeated string debug_urls = 4;

الملخص العام int getDebugUrlsCount () 

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.
repeated string debug_urls = 4;

قائمة مجردة عامة<String> getDebugUrlsList () 

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.
repeated string debug_urls = 4;

سلسلة مجردة عامة getNodeName () 

 Name of the node to watch.
 Use "*" for wildcard. But note: currently, regex is not supported in
 general.
string node_name = 1;

الملخص العام com.google.protobuf.ByteString getNodeNameBytes () 

 Name of the node to watch.
 Use "*" for wildcard. But note: currently, regex is not supported in
 general.
string node_name = 1;

الملخص العام int getOutputSlot () 

 Output slot to watch.
 The semantics of output_slot == -1 is that all outputs of the node
 will be watched (i.e., a wildcard).
 Other negative values of output_slot are invalid and will lead to
 errors currently.
int32 output_slot = 2;

الملخص المنطقي العام getTolerateDebugOpCreationFailures () 

 Do not error out if debug op creation fails (e.g., due to dtype
 incompatibility). Instead, just log the failure.
bool tolerate_debug_op_creation_failures = 5;