DebugTensorWatchOrBuilder

공개 인터페이스 DebugTensorWatchOrBuilder

알려진 간접 하위 클래스

DebugTensorWatch , DebugTensorWatch.Builder

공개 방법

추상 문자열	getDebugOps (정수 인덱스) Name(s) of the debugging op(s).
추상 com.google.protobuf.ByteString	getDebugOpsBytes (정수 인덱스) Name(s) of the debugging op(s).
추상 정수	getDebugOpsCount () Name(s) of the debugging op(s).
추상 목록<문자열>	getDebugOpsList () Name(s) of the debugging op(s).
추상 문자열	getDebugUrls (정수 인덱스) URL(s) for debug targets(s).
추상 com.google.protobuf.ByteString	getDebugUrlsBytes (정수 인덱스) URL(s) for debug targets(s).
추상 정수	getDebugUrlsCount () URL(s) for debug targets(s).
추상 목록<문자열>	getDebugUrlsList () URL(s) for debug targets(s).
추상 문자열	getNodeName () Name of the node to watch.
추상 com.google.protobuf.ByteString	getNodeNameBytes () Name of the node to watch.
추상 정수	getOutputSlot () Output slot to watch.
추상 부울	getTolerateDebugOpCreationFailures () Do not error out if debug op creation fails (e.g., due to dtype incompatibility).

공개 방법

공개 추상 문자열 getDebugOps (int 인덱스)

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}

repeated string debug_ops = 3;

공개 추상 com.google.protobuf.ByteString getDebugOpsBytes (int 인덱스)

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}

repeated string debug_ops = 3;

공개 추상 int getDebugOpsCount ()

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}

repeated string debug_ops = 3;

공개 추상 List<String> getDebugOpsList ()

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}

repeated string debug_ops = 3;

공개 추상 문자열 getDebugUrls (int 인덱스)

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.

repeated string debug_urls = 4;

공개 추상 com.google.protobuf.ByteString getDebugUrlsBytes (int 인덱스)

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.

repeated string debug_urls = 4;

공개 추상 int getDebugUrlsCount ()

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.

repeated string debug_urls = 4;

공개 추상 List<String> getDebugUrlsList ()

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.

repeated string debug_urls = 4;

공개 추상 문자열 getNodeName ()

 Name of the node to watch.
 Use "*" for wildcard. But note: currently, regex is not supported in
 general.

string node_name = 1;

공개 추상 com.google.protobuf.ByteString getNodeNameBytes ()

 Name of the node to watch.
 Use "*" for wildcard. But note: currently, regex is not supported in
 general.

string node_name = 1;

공개 추상 int getOutputSlot ()

 Output slot to watch.
 The semantics of output_slot == -1 is that all outputs of the node
 will be watched (i.e., a wildcard).
 Other negative values of output_slot are invalid and will lead to
 errors currently.

int32 output_slot = 2;

공개 추상 부울 getTolerateDebugOpCreationFailures ()

 Do not error out if debug op creation fails (e.g., due to dtype
 incompatibility). Instead, just log the failure.

bool tolerate_debug_op_creation_failures = 5;