सार्वजनिक स्थैतिक अंतिम वर्ग DebugTensorWatch.Builder
Option for watching a node in TensorFlow Debugger (tfdbg).प्रोटोबफ़ प्रकार
tensorflow.DebugTensorWatch सार्वजनिक तरीके
| डिबगटेन्सरवॉच.बिल्डर | addAllDebugOps (इटरेबल<स्ट्रिंग> मान) Name(s) of the debugging op(s). |
| डिबगटेन्सरवॉच.बिल्डर | addAllDebugUrls (इटरेबल<स्ट्रिंग> मान) URL(s) for debug targets(s). |
| डिबगटेन्सरवॉच.बिल्डर | addDebugOps (स्ट्रिंग मान) Name(s) of the debugging op(s). |
| डिबगटेन्सरवॉच.बिल्डर | addDebugOpsBytes (com.google.protobuf.ByteString मान) Name(s) of the debugging op(s). |
| डिबगटेन्सरवॉच.बिल्डर | addDebugUrls (स्ट्रिंग मान) URL(s) for debug targets(s). |
| डिबगटेन्सरवॉच.बिल्डर | addDebugUrlsBytes (com.google.protobuf.ByteString मान) URL(s) for debug targets(s). |
| डिबगटेन्सरवॉच.बिल्डर | addRepeatedField (com.google.protobuf.Descriptors.FieldDescriptor फ़ील्ड, ऑब्जेक्ट मान) |
| डीबगटेन्सरवॉच | निर्माण () |
| डीबगटेन्सरवॉच | बिल्डआंशिक () |
| डिबगटेन्सरवॉच.बिल्डर | स्पष्ट () |
| डिबगटेन्सरवॉच.बिल्डर | क्लियरडिबगऑप्स () Name(s) of the debugging op(s). |
| डिबगटेन्सरवॉच.बिल्डर | क्लियरडिबगयूआरएल () URL(s) for debug targets(s). |
| डिबगटेन्सरवॉच.बिल्डर | क्लियरफ़ील्ड (com.google.protobuf.Descriptors.FieldDescriptor फ़ील्ड) |
| डिबगटेन्सरवॉच.बिल्डर | क्लियरनोडनाम () Name of the node to watch. |
| डिबगटेन्सरवॉच.बिल्डर | ClearOneof (com.google.protobuf.Descriptors.OneofDescriptor oneof) |
| डिबगटेन्सरवॉच.बिल्डर | क्लियरआउटपुटस्लॉट () Output slot to watch. |
| डिबगटेन्सरवॉच.बिल्डर | ClearTolerateDebugOpCreationFairures () Do not error out if debug op creation fails (e.g., due to dtype incompatibility). |
| डिबगटेन्सरवॉच.बिल्डर | क्लोन () |
| डोरी | getDebugOps (इंट इंडेक्स) Name(s) of the debugging op(s). |
| com.google.protobuf.ByteString | getDebugOpsBytes (int अनुक्रमणिका) Name(s) of the debugging op(s). |
| int यहाँ | getDebugOpsCount () Name(s) of the debugging op(s). |
| com.google.protobuf.ProtocolStringList | getDebugOpsList () Name(s) of the debugging op(s). |
| डोरी | getDebugUrls (int अनुक्रमणिका) URL(s) for debug targets(s). |
| com.google.protobuf.ByteString | getDebugUrlsBytes (int अनुक्रमणिका) URL(s) for debug targets(s). |
| int यहाँ | getDebugUrlsCount () URL(s) for debug targets(s). |
| com.google.protobuf.ProtocolStringList | getDebugUrlsसूची () URL(s) for debug targets(s). |
| डीबगटेन्सरवॉच | |
| अंतिम स्थिर com.google.protobuf.Descriptors.Descriptor | |
| com.google.protobuf.Descriptors.Descriptor | |
| डोरी | getNodeName () Name of the node to watch. |
| com.google.protobuf.ByteString | getNodeNameBytes () Name of the node to watch. |
| int यहाँ | getOutputSlot () Output slot to watch. |
| बूलियन | getTolerateDebugOpCreationFairures () Do not error out if debug op creation fails (e.g., due to dtype incompatibility). |
| अंतिम बूलियन | |
| डिबगटेन्सरवॉच.बिल्डर | मर्जफ्रॉम (com.google.protobuf.CodedInputStream इनपुट, com.google.protobuf.ExtensionRegistryLite एक्सटेंशनरजिस्ट्री) |
| डिबगटेन्सरवॉच.बिल्डर | मर्जफ्रॉम (com.google.protobuf.Message अन्य) |
| अंतिम DebugTensorWatch.Builder | मर्जअज्ञातफ़ील्ड्स (com.google.protobuf.UnknownFieldSet अज्ञातफ़ील्ड्स) |
| डिबगटेन्सरवॉच.बिल्डर | setDebugOps (int अनुक्रमणिका, स्ट्रिंग मान) Name(s) of the debugging op(s). |
| डिबगटेन्सरवॉच.बिल्डर | setDebugUrls (int अनुक्रमणिका, स्ट्रिंग मान) URL(s) for debug targets(s). |
| डिबगटेन्सरवॉच.बिल्डर | सेटफ़ील्ड (com.google.protobuf.Descriptors.FieldDescriptor फ़ील्ड, ऑब्जेक्ट मान) |
| डिबगटेन्सरवॉच.बिल्डर | setNodeName (स्ट्रिंग मान) Name of the node to watch. |
| डिबगटेन्सरवॉच.बिल्डर | setNodeNameBytes (com.google.protobuf.ByteString मान) Name of the node to watch. |
| डिबगटेन्सरवॉच.बिल्डर | setOutputSlot (int मान) Output slot to watch. |
| डिबगटेन्सरवॉच.बिल्डर | setRepeatedField (com.google.protobuf.Descriptors.FieldDescriptor फ़ील्ड, इंट इंडेक्स, ऑब्जेक्ट वैल्यू) |
| डिबगटेन्सरवॉच.बिल्डर | setTolerateDebugOpCreationFairures (बूलियन मान) Do not error out if debug op creation fails (e.g., due to dtype incompatibility). |
| अंतिम DebugTensorWatch.Builder | अज्ञात फ़ील्ड सेट करें (com.google.protobuf. अज्ञात फ़ील्ड सेट अज्ञात फ़ील्ड) |
विरासत में मिली विधियाँ
सार्वजनिक तरीके
सार्वजनिक DebugTensorWatch.Builder addAllDebugOps (Iterable<String> मान)
Name(s) of the debugging op(s).
One or more than one probes on a tensor.
e.g., {"DebugIdentity", "DebugNanCount"}
repeated string debug_ops = 3; सार्वजनिक DebugTensorWatch.Builder addAllDebugUrls (Iterable<String> मान)
URL(s) for debug targets(s).
Supported URL formats are:
- file:///foo/tfdbg_dump: Writes out Event content to file
/foo/tfdbg_dump. Assumes all directories can be created if they don't
already exist.
- grpc://localhost:11011: Sends an RPC request to an EventListener
service running at localhost:11011 with the event.
- memcbk:///event_key: Routes tensors to clients using the
callback registered with the DebugCallbackRegistry for event_key.
Each debug op listed in debug_ops will publish its output tensor (debug
signal) to all URLs in debug_urls.
N.B. Session::Run() supports concurrent invocations of the same inputs
(feed keys), outputs and target nodes. If such concurrent invocations
are to be debugged, the callers of Session::Run() must use distinct
debug_urls to make sure that the streamed or dumped events do not overlap
among the invocations.
TODO(cais): More visible documentation of this in g3docs.
repeated string debug_urls = 4; सार्वजनिक DebugTensorWatch.Builder addDebugOps (स्ट्रिंग मान)
Name(s) of the debugging op(s).
One or more than one probes on a tensor.
e.g., {"DebugIdentity", "DebugNanCount"}
repeated string debug_ops = 3; सार्वजनिक DebugTensorWatch.Builder addDebugOpsBytes (com.google.protobuf.ByteString मान)
Name(s) of the debugging op(s).
One or more than one probes on a tensor.
e.g., {"DebugIdentity", "DebugNanCount"}
repeated string debug_ops = 3; सार्वजनिक DebugTensorWatch.Builder addDebugUrls (स्ट्रिंग मान)
URL(s) for debug targets(s).
Supported URL formats are:
- file:///foo/tfdbg_dump: Writes out Event content to file
/foo/tfdbg_dump. Assumes all directories can be created if they don't
already exist.
- grpc://localhost:11011: Sends an RPC request to an EventListener
service running at localhost:11011 with the event.
- memcbk:///event_key: Routes tensors to clients using the
callback registered with the DebugCallbackRegistry for event_key.
Each debug op listed in debug_ops will publish its output tensor (debug
signal) to all URLs in debug_urls.
N.B. Session::Run() supports concurrent invocations of the same inputs
(feed keys), outputs and target nodes. If such concurrent invocations
are to be debugged, the callers of Session::Run() must use distinct
debug_urls to make sure that the streamed or dumped events do not overlap
among the invocations.
TODO(cais): More visible documentation of this in g3docs.
repeated string debug_urls = 4; सार्वजनिक DebugTensorWatch.Builder addDebugUrlsBytes (com.google.protobuf.ByteString मान)
URL(s) for debug targets(s).
Supported URL formats are:
- file:///foo/tfdbg_dump: Writes out Event content to file
/foo/tfdbg_dump. Assumes all directories can be created if they don't
already exist.
- grpc://localhost:11011: Sends an RPC request to an EventListener
service running at localhost:11011 with the event.
- memcbk:///event_key: Routes tensors to clients using the
callback registered with the DebugCallbackRegistry for event_key.
Each debug op listed in debug_ops will publish its output tensor (debug
signal) to all URLs in debug_urls.
N.B. Session::Run() supports concurrent invocations of the same inputs
(feed keys), outputs and target nodes. If such concurrent invocations
are to be debugged, the callers of Session::Run() must use distinct
debug_urls to make sure that the streamed or dumped events do not overlap
among the invocations.
TODO(cais): More visible documentation of this in g3docs.
repeated string debug_urls = 4; सार्वजनिक DebugTensorWatch.Builder addRepeatedField (com.google.protobuf.Descriptors.FieldDescriptor फ़ील्ड, ऑब्जेक्ट मान)
सार्वजनिक DebugTensorWatch.Builder ClearDebugOps ()
Name(s) of the debugging op(s).
One or more than one probes on a tensor.
e.g., {"DebugIdentity", "DebugNanCount"}
repeated string debug_ops = 3; सार्वजनिक DebugTensorWatch.Builder ClearDebugUrls ()
URL(s) for debug targets(s).
Supported URL formats are:
- file:///foo/tfdbg_dump: Writes out Event content to file
/foo/tfdbg_dump. Assumes all directories can be created if they don't
already exist.
- grpc://localhost:11011: Sends an RPC request to an EventListener
service running at localhost:11011 with the event.
- memcbk:///event_key: Routes tensors to clients using the
callback registered with the DebugCallbackRegistry for event_key.
Each debug op listed in debug_ops will publish its output tensor (debug
signal) to all URLs in debug_urls.
N.B. Session::Run() supports concurrent invocations of the same inputs
(feed keys), outputs and target nodes. If such concurrent invocations
are to be debugged, the callers of Session::Run() must use distinct
debug_urls to make sure that the streamed or dumped events do not overlap
among the invocations.
TODO(cais): More visible documentation of this in g3docs.
repeated string debug_urls = 4; सार्वजनिक DebugTensorWatch.Builder ClearField (com.google.protobuf.Descriptors.FieldDescriptor फ़ील्ड)
सार्वजनिक DebugTensorWatch.Builder ClearNodeName ()
Name of the node to watch. Use "*" for wildcard. But note: currently, regex is not supported in general.
string node_name = 1; सार्वजनिक DebugTensorWatch.Builder ClearOneof (com.google.protobuf.Descriptors.OneofDescriptor oneof)
सार्वजनिक DebugTensorWatch.Builder ClearOutputSlot ()
Output slot to watch. The semantics of output_slot == -1 is that all outputs of the node will be watched (i.e., a wildcard). Other negative values of output_slot are invalid and will lead to errors currently.
int32 output_slot = 2; सार्वजनिक DebugTensorWatch.Builder ClearTolerateDebugOpCreationFairures ()
Do not error out if debug op creation fails (e.g., due to dtype incompatibility). Instead, just log the failure.
bool tolerate_debug_op_creation_failures = 5; सार्वजनिक स्ट्रिंग getDebugOps (int अनुक्रमणिका)
Name(s) of the debugging op(s).
One or more than one probes on a tensor.
e.g., {"DebugIdentity", "DebugNanCount"}
repeated string debug_ops = 3; सार्वजनिक com.google.protobuf.ByteString getDebugOpsBytes (int अनुक्रमणिका)
Name(s) of the debugging op(s).
One or more than one probes on a tensor.
e.g., {"DebugIdentity", "DebugNanCount"}
repeated string debug_ops = 3; सार्वजनिक int getDebugOpsCount ()
Name(s) of the debugging op(s).
One or more than one probes on a tensor.
e.g., {"DebugIdentity", "DebugNanCount"}
repeated string debug_ops = 3; सार्वजनिक com.google.protobuf.ProtocolStringList getDebugOpsList ()
Name(s) of the debugging op(s).
One or more than one probes on a tensor.
e.g., {"DebugIdentity", "DebugNanCount"}
repeated string debug_ops = 3; सार्वजनिक स्ट्रिंग getDebugUrls (int अनुक्रमणिका)
URL(s) for debug targets(s).
Supported URL formats are:
- file:///foo/tfdbg_dump: Writes out Event content to file
/foo/tfdbg_dump. Assumes all directories can be created if they don't
already exist.
- grpc://localhost:11011: Sends an RPC request to an EventListener
service running at localhost:11011 with the event.
- memcbk:///event_key: Routes tensors to clients using the
callback registered with the DebugCallbackRegistry for event_key.
Each debug op listed in debug_ops will publish its output tensor (debug
signal) to all URLs in debug_urls.
N.B. Session::Run() supports concurrent invocations of the same inputs
(feed keys), outputs and target nodes. If such concurrent invocations
are to be debugged, the callers of Session::Run() must use distinct
debug_urls to make sure that the streamed or dumped events do not overlap
among the invocations.
TODO(cais): More visible documentation of this in g3docs.
repeated string debug_urls = 4; सार्वजनिक com.google.protobuf.ByteString getDebugUrlsBytes (int अनुक्रमणिका)
URL(s) for debug targets(s).
Supported URL formats are:
- file:///foo/tfdbg_dump: Writes out Event content to file
/foo/tfdbg_dump. Assumes all directories can be created if they don't
already exist.
- grpc://localhost:11011: Sends an RPC request to an EventListener
service running at localhost:11011 with the event.
- memcbk:///event_key: Routes tensors to clients using the
callback registered with the DebugCallbackRegistry for event_key.
Each debug op listed in debug_ops will publish its output tensor (debug
signal) to all URLs in debug_urls.
N.B. Session::Run() supports concurrent invocations of the same inputs
(feed keys), outputs and target nodes. If such concurrent invocations
are to be debugged, the callers of Session::Run() must use distinct
debug_urls to make sure that the streamed or dumped events do not overlap
among the invocations.
TODO(cais): More visible documentation of this in g3docs.
repeated string debug_urls = 4; सार्वजनिक int getDebugUrlsCount ()
URL(s) for debug targets(s).
Supported URL formats are:
- file:///foo/tfdbg_dump: Writes out Event content to file
/foo/tfdbg_dump. Assumes all directories can be created if they don't
already exist.
- grpc://localhost:11011: Sends an RPC request to an EventListener
service running at localhost:11011 with the event.
- memcbk:///event_key: Routes tensors to clients using the
callback registered with the DebugCallbackRegistry for event_key.
Each debug op listed in debug_ops will publish its output tensor (debug
signal) to all URLs in debug_urls.
N.B. Session::Run() supports concurrent invocations of the same inputs
(feed keys), outputs and target nodes. If such concurrent invocations
are to be debugged, the callers of Session::Run() must use distinct
debug_urls to make sure that the streamed or dumped events do not overlap
among the invocations.
TODO(cais): More visible documentation of this in g3docs.
repeated string debug_urls = 4; सार्वजनिक com.google.protobuf.ProtocolStringList getDebugUrlsList ()
URL(s) for debug targets(s).
Supported URL formats are:
- file:///foo/tfdbg_dump: Writes out Event content to file
/foo/tfdbg_dump. Assumes all directories can be created if they don't
already exist.
- grpc://localhost:11011: Sends an RPC request to an EventListener
service running at localhost:11011 with the event.
- memcbk:///event_key: Routes tensors to clients using the
callback registered with the DebugCallbackRegistry for event_key.
Each debug op listed in debug_ops will publish its output tensor (debug
signal) to all URLs in debug_urls.
N.B. Session::Run() supports concurrent invocations of the same inputs
(feed keys), outputs and target nodes. If such concurrent invocations
are to be debugged, the callers of Session::Run() must use distinct
debug_urls to make sure that the streamed or dumped events do not overlap
among the invocations.
TODO(cais): More visible documentation of this in g3docs.
repeated string debug_urls = 4; सार्वजनिक स्थैतिक अंतिम com.google.protobuf.Descriptors.Descriptor getDescriptor ()
सार्वजनिक com.google.protobuf.Descriptors.Descriptor getDescriptorForType ()
सार्वजनिक स्ट्रिंग getNodeName ()
Name of the node to watch. Use "*" for wildcard. But note: currently, regex is not supported in general.
string node_name = 1; सार्वजनिक com.google.protobuf.ByteString getNodeNameBytes ()
Name of the node to watch. Use "*" for wildcard. But note: currently, regex is not supported in general.
string node_name = 1; सार्वजनिक int getOutputSlot ()
Output slot to watch. The semantics of output_slot == -1 is that all outputs of the node will be watched (i.e., a wildcard). Other negative values of output_slot are invalid and will lead to errors currently.
int32 output_slot = 2; सार्वजनिक बूलियन getTolerateDebugOpCreationFairures ()
Do not error out if debug op creation fails (e.g., due to dtype incompatibility). Instead, just log the failure.
bool tolerate_debug_op_creation_failures = 5; सार्वजनिक अंतिम बूलियन आरंभीकृत है ()
सार्वजनिक DebugTensorWatch.Builder mergeFrom (com.google.protobuf.CodedInputStream इनपुट, com.google.protobuf.ExtensionRegistryLite एक्सटेंशनरजिस्ट्री)
फेंकता
| आईओ अपवाद |
|---|
सार्वजनिक अंतिम DebugTensorWatch.Builder mergeUnknownFields (com.google.protobuf.UnknownFieldSet अज्ञातFields)
सार्वजनिक DebugTensorWatch.Builder setDebugOps (इंट इंडेक्स, स्ट्रिंग मान)
Name(s) of the debugging op(s).
One or more than one probes on a tensor.
e.g., {"DebugIdentity", "DebugNanCount"}
repeated string debug_ops = 3; सार्वजनिक DebugTensorWatch.Builder setDebugUrls (int अनुक्रमणिका, स्ट्रिंग मान)
URL(s) for debug targets(s).
Supported URL formats are:
- file:///foo/tfdbg_dump: Writes out Event content to file
/foo/tfdbg_dump. Assumes all directories can be created if they don't
already exist.
- grpc://localhost:11011: Sends an RPC request to an EventListener
service running at localhost:11011 with the event.
- memcbk:///event_key: Routes tensors to clients using the
callback registered with the DebugCallbackRegistry for event_key.
Each debug op listed in debug_ops will publish its output tensor (debug
signal) to all URLs in debug_urls.
N.B. Session::Run() supports concurrent invocations of the same inputs
(feed keys), outputs and target nodes. If such concurrent invocations
are to be debugged, the callers of Session::Run() must use distinct
debug_urls to make sure that the streamed or dumped events do not overlap
among the invocations.
TODO(cais): More visible documentation of this in g3docs.
repeated string debug_urls = 4; सार्वजनिक DebugTensorWatch.Builder setField (com.google.protobuf.Descriptors.FieldDescriptor फ़ील्ड, ऑब्जेक्ट मान)
सार्वजनिक DebugTensorWatch.Builder setNodeName (स्ट्रिंग मान)
Name of the node to watch. Use "*" for wildcard. But note: currently, regex is not supported in general.
string node_name = 1; सार्वजनिक DebugTensorWatch.Builder setNodeNameBytes (com.google.protobuf.ByteString मान)
Name of the node to watch. Use "*" for wildcard. But note: currently, regex is not supported in general.
string node_name = 1; सार्वजनिक DebugTensorWatch.Builder setOutputSlot (int मान)
Output slot to watch. The semantics of output_slot == -1 is that all outputs of the node will be watched (i.e., a wildcard). Other negative values of output_slot are invalid and will lead to errors currently.
int32 output_slot = 2; सार्वजनिक DebugTensorWatch.Builder setRepeatedField (com.google.protobuf.Descriptors.FieldDescriptor फ़ील्ड, int अनुक्रमणिका, ऑब्जेक्ट मान)
सार्वजनिक DebugTensorWatch.Builder setTolerateDebugOpCreationFairures (बूलियन मान)
Do not error out if debug op creation fails (e.g., due to dtype incompatibility). Instead, just log the failure.
bool tolerate_debug_op_creation_failures = 5;