tf.keras.optimizers.Ftrl

Optimizer that implements the FTRL algorithm.

Inherits From: Optimizer

"Follow The Regularized Leader" (FTRL) is an optimization algorithm developed at Google for click-through rate prediction in the early 2010s. It is most suitable for shallow models with large and sparse feature spaces. The algorithm is described by McMahan et al., 2013. The Keras version has support for both online L2 regularization (the L2 regularization described in the paper above) and shrinkage-type L2 regularization (which is the addition of an L2 penalty to the loss function).

Initialization:

n = 0
sigma = 0
z = 0

Update rule for one variable w:

prev_n = n
n = n + g ** 2
sigma = (n ** -lr_power - prev_n ** -lr_power) / lr
z = z + g - sigma * w
if abs(z) < lambda_1:
  w = 0
else:
  w = (sgn(z) * lambda_1 - z) / ((beta + sqrt(n)) / alpha + lambda_2)

Notation:

  • lr is the learning rate
  • g is the gradient for the variable
  • lambda_1 is the L1 regularization strength
  • lambda_2 is the L2 regularization strength
  • lr_power is the power to scale n.

Check the documentation for the l2_shrinkage_regularization_strength parameter for more details when shrinkage is enabled, in which case gradient is replaced with a gradient with shrinkage.

learning_rate A float, a keras.optimizers.schedules.LearningRateSchedule instance, or a callable that takes no arguments and returns the actual value to use. The learning rate. Defaults to 0.001.
learning_rate_power A float value, must be less or equal to zero. Controls how the learning rate decreases during training. Use zero for a fixed learning rate.
initial_accumulator_value The starting value for accumulators. Only zero or positive values are allowed.
l1_regularization_strength A float value, must be greater than or equal to zero. Defaults to 0.0.
l2_regularization_strength A float value, must be greater than or equal to zero. Defaults to 0.0.
l2_shrinkage_regularization_strength A float value, must be greater than or equal to zero. This differs from L2 above in that the L2 above is a stabilization penalty, whereas this L2 shrinkage is a magnitude penalty. When input is sparse shrinkage will only happen on the active weights.
beta A float value, representing the beta value from the paper. Defaults to 0.0.
name String. The name to use for momentum accumulator weights created by the optimizer.
weight_decay Float. If set, weight decay is applied.
clipnorm Float. If set, the gradient of each weight is individually clipped so that its norm is no higher than this value.
clipvalue Float. If set, the gradient of each weight is clipped to be no higher than this value.
global_clipnorm Float. If set, the gradient of all weights is clipped so that their global norm is no higher than this value.
use_ema Boolean, defaults to False. If True, exponential moving average (EMA) is applied. EMA consists of computing an exponential moving average of the weights of the model (as the weight values change after each training batch), and periodically overwriting the weights with their moving average.
ema_momentum Float, defaults to 0.99. Only used if use_ema=True. This is the momentum to use when computing the EMA of the model's weights: new_average = ema_momentum * old_average + (1 - ema_momentum) * current_variable_value.
ema_overwrite_frequency Int or None, defaults to None. Only used if use_ema=True. Every ema_overwrite_frequency steps of iterations, we overwrite the model variable by its moving average. If None, the optimizer does not overwrite model variables in the middle of training, and you need to explicitly overwrite the variables at the end of training by calling optimizer.finalize_variable_values() (which updates the model variables in-place). When using the built-in fit() training loop, this happens automatically after the last epoch, and you don't need to do anything.
loss_scale_factor Float or None. If a float, the scale factor will be multiplied the loss before computing gradients, and the inverse of the scale factor will be multiplied by the gradients before updating variables. Useful for preventing underflow during mixed precision training. Alternately, keras.optimizers.LossScaleOptimizer will automatically set a loss scale factor.
gradient_accumulation_steps Int or None. If an int, model & optimizer variables will not be updated at every step; instead they will be updated every gradient_accumulation_steps steps, using the average value of the gradients since the last update. This is known as "gradient accumulation". This can be useful when your batch size is very small, in order to reduce gradient noise at each update step.

learning_rate

variables

Methods

add_variable

View source

add_variable_from_reference

View source

Add an all-zeros variable with the shape and dtype of a reference variable.

apply

View source

Update traininable variables according to provided gradient values.

grads should be a list of gradient tensors with 1:1 mapping to the list of variables the optimizer was built with.

trainable_variables can be provided on the first call to build the optimizer.

apply_gradients

View source

assign

View source

Assign a value to a variable.

This should be used in optimizers instead of variable.assign(value) to support backend specific optimizations. Note that the variable can be a model variable or an optimizer variable; it can be a backend native variable or a Keras variable.

Args
variable The variable to update.
value The value to add to the variable.

assign_add

View source

Add a value to a variable.

This should be used in optimizers instead of variable.assign_add(value) to support backend specific optimizations. Note that the variable can be a model variable or an optimizer variable; it can be a backend native variable or a Keras variable.

Args
variable The variable to update.
value The value to add to the variable.

assign_sub

View source

Subtract a value from a variable.

This should be used in optimizers instead of variable.assign_sub(value) to support backend specific optimizations. Note that the variable can be a model variable or an optimizer variable; it can be a backend native variable or a Keras variable.

Args
variable The variable to update.
value The value to add to the variable.

build

View source

Initialize optimizer variables.

Args
var_list list of model variables to build Ftrl variables on.

exclude_from_weight_decay

View source

Exclude variables from weight decay.

This method must be called before the optimizer's build method is called. You can set specific variables to exclude out, or set a list of strings as the anchor words, if any of which appear in a variable's name, then the variable is excluded.

Args
var_list A list of Variables to exclude from weight decay.
var_names A list of strings. If any string in var_names appear in the model variable's name, then this model variable is excluded from weight decay. For example, var_names=['bias'] excludes all bias variables from weight decay.

finalize_variable_values

View source

Set the final value of model's trainable variables.

Sometimes there are some extra steps before ending the variable updates, such as overriding the model variables with its average value.

Args
var_list list of model variables.

from_config

View source

Creates an optimizer from its config.

This method is the reverse of get_config, capable of instantiating the same optimizer from the config dictionary.

Args
config A Python dictionary, typically the output of get_config.
custom_objects A Python dictionary mapping names to additional user-defined Python objects needed to recreate this optimizer.

Returns
An optimizer instance.

get_config

View source

Returns the config of the optimizer.

An optimizer config is a Python dictionary (serializable) containing the configuration of an optimizer. The same optimizer can be reinstantiated later (without any saved state) from this configuration.

Subclass optimizer should override this method to include other hyperparameters.

Returns
Python dictionary.

load_own_variables

View source

Set the state of this optimizer object.

save_own_variables

View source

Get the state of this optimizer object.

scale_loss

View source

Scale the loss before computing gradients.

Scales the loss before gradients are computed in a train_step. This is primarily useful during mixed precision training to prevent numeric underflow.

set_weights

View source

Set the weights of the optimizer.

stateless_apply

View source

update_step

View source

Update step given gradient and the associated model variable.